EasyManua.ls Logo

Lainox NABOO NAGB101 - User Manual

Lainox NABOO NAGB101
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
90027911rev04
EN
CAUTION: Read the instructions
prior to using the equipment
INSTALLATION AND
MAINTENANCE MANUAL
NABOO
SAPIENS
AROMA NABOO
AROMA SAPIENS
Question and Answer IconNeed help?

Do you have a question about the Lainox NABOO NAGB101 and is the answer not in the manual?

Lainox NABOO NAGB101 Specifications

General IconGeneral
BrandLainox
ModelNABOO NAGB101
CategoryOven
LanguageEnglish

Summary

Special Requirements for the Installation Site

Ventilation and extractor hood requirements

Room ventilation requirements for gas installations and extractor hoods.

Flue gas extraction requirements

Requirements for flue gas extraction stack or system for gas appliances.

Gas supply and shutoff valve installation

Gas supply plumbing installation according to regulations and fast-acting shutoff valve.

Positioning

Lifting and handling of floor-standing ovens

Guidelines for lifting and handling floor-standing ovens using forklifts or jack pallets.

Washing Systems

Positioning and setting COMBICLEAN detergent cartridge

Instructions for positioning and setting COMBICLEAN detergent cartridge/container.

Positioning and setting CALFREE descaler cartridge

Instructions for positioning and setting CALFREE descaler cartridge/container.

Replacing the COMBICLEAN detergent cartridge

Procedure for replacing the COMBICLEAN detergent cartridge.

Positioning and setting COMBICLEAN;CALFREE cartridges

Instructions for positioning and setting both COMBICLEAN and CALFREE cartridges.

CALOUT (if present)

Gas Connection Procedures

Gas connection requirements

Specifications for gas supply pipe selection, connection, and shutoff valve.

Exhausting flue gases

Guidelines for exhausting flue gases based on installation type and room ventilation.

Operating at the Rated Heat Output

Checking nominal heat capacity (Chamber Burner)

Procedure for checking chamber burner depth and fan speed.

Testing burner function and sequence control

How to test burner function, block sequences, and use CLIMA button.

Combustion analysis: CO and CO2 values

Checking combustion CO (ppm) and CO2 (%) values with an instrument.

Commissioning and Testing

Pre-connection and installation checks

Checking appliance and installation after connection, including protective film, vents, and leaks.

Related product manuals