LAMAR LS 70 - Assembly Stage 4: Attach Free Motion Assembly

ASSEMBLY STAGE # 4
Attach the Free Motion Assembly to the Vertical Upright
Assembly Hardware Required:
#37 Button Head Allen Screw Qty. 1 #50 Flat Washer Qty. 6
#40 Button Head Allen Screw Qty. 2 #54 Nylon Nut Qty. 3
Assembly Description:
A) Align the mounting holes of the Free Motion Assembly (#12) with the lower mounting holes of the Vertical
Upright (#4) and secure the assembly in place using back-to-front positioned hardware; 2-Button Head Allen
Screws (#40), 4-Flat Washers (#50), and 2-Nylon Nuts (#55). Using the side mounting holes add 1-Button Head
Allen Screw, (#37), 2-Flat Washers (#50), and 1-Nylon Nut (#55) . (Reference Figure #6)
♦ Assembly Stage #4 completed (Reference Figure #)
40
50
55
50
55
50
37
12
Figure #6
Figure #6
50