ASSEMBLY INTRO PAGE 7
A
A
SSEMBLY
SSEMBLY
P
P
REPARATION
REPARATION
♦ Perform a visual inspection of all assembly parts before proceeding with product assembly.
Verify pre-assembly status by referencing the itemized component listing and hardware chart
in this manual.
♦ The assembly process has been documented in easy to follow, step-by-step instruction. Please
review and follow the assembly instructions carefully. Take time to familiarize yourself with
the entire assembly process before proceeding. Assembly Tip
: For added ease of assembly,
pre-stage the parts needed to complete each assembly step.
♦ Assemble the equipment in a 5 x 8 ft. flat area. The same amount of space should be consid-
ered for assembled equipment usage. Note: Fully assembled product will be heavy, therefore it
is better to perform the product assembly in the desired usage location.
♦ For ease of assembly and an added safety precaution, two person assembly is recommended.
♦ Do not dispose of any packaging materials until assembly of product is completed.
♦ Basic tools to assemble the equipment are enclosed with main assembly hardware.
♦ Review and follow the preventative maintenance tips listed in this manual.
♦ If you experience problems with operation of the equipment, carefully review the assembly
instructions and make sure all steps were completed.
♦ Completely fill-out the product registration form & forward it within 30-days of purchase.
♦ Please contact us if have additional questions or need service assistance (877.861.2181).
To Next Page
Loading...