To Next PageTo Next Page
Need help?Do you have a question about the Lambda LP Series and is the answer not in the manual?
Details voltage regulation for line and load, and current capabilities.
Specifies voltage ranges and maximum current ratings at different ambient temperatures.
Defines line and load regulation for output voltage with performance metrics.
Describes external resistor and voltage programming methods for output control.
Defines ripple and noise levels and output voltage change with temperature.
Explains automatic crossover to constant current mode and its regulation.
Details AC input voltage, frequency, and power consumption for various models.
Details external and internal fuses and current limiting circuits for protection.
Describes output voltage behavior during power changes and operating temperature limits.
Details coarse/fine voltage and current controls, binding posts, and remote sensing.
Describes the power switch, indicator light, and test jacks for monitoring.
Specifies unit size, weight, and available panel finishes.
Describes benchtop mounting with bumpers and standard 19" rack mounting with adapters.
Details options like fungus proofing, metering, and voltage input variations.
Lists rack adapters, blank panels, and overvoltage protectors for system integration.
Provides an overview of the power supply's main components and circuit arrangement.
Explains how the supply operates in constant voltage and constant current modes with crossover.
Details operation of power switch, voltage/current controls, meters, and fuses.
Explains rear terminal block, front panel binding posts, and recommended load wiring.
Describes permissible grounding configurations for positive, negative, or no terminal.
Explains operation as constant voltage or constant current source with automatic crossover.
Details wiring for constant voltage operation using local or remote sensing.
Describes local sensing (2-wire) and remote sensing (4-wire) connections for load.
Explains programming output voltage via external resistor or voltage source.
Details connections for constant current mode with automatic crossover.
Explains how to connect multiple units in series to increase voltage capability.
Emphasizes safety precautions for operating and servicing the equipment.
Step-by-step guide for setting up and operating the supply in constant voltage mode.
Guide for setting voltage via external controls and checking output.
Steps for setting current limit, voltage limit, and checking output.
Procedure for connecting units in series for constant voltage output with current limit.
Details setting voltage, current limits, and checking output for series voltage operation.
Steps for setting current and voltage limits for series constant current operation.
Procedure for connecting units in parallel for constant voltage output with current limit.
Details setting voltage, current limits, and checking output for parallel voltage operation.
Steps for setting current and voltage limits for parallel constant current operation.
Explains thermostat function, causes for shutdown, and automatic reset procedure.
Details fuse protection, causes of blowing, and making the circuit operative again.
General| Brand | Lambda |
|---|---|
| Model | LP Series |
| Category | Power Supply |
| Language | English |
