Lamona LAM9500 User Manual (English)

Questions and Answers:

L
Laura SimsAug 17, 2025
Why I can't switch my Lamona induction hob on?
- M
  mortizAug 17, 2025
  If you can't switch your Lamona induction hob on, check the following: * Check the wiring system (fuse box) in the house to see if a fuse has blown. * Ensure the hob has been connected to the mains. * Check if the childproof lock is activated (display shows an 'L'). * Make sure the sensor keys are not covered by a damp cloth, fluid, or a metallic object. * Verify you are using suitable cookware as described in the section on Cookware for induction hobs.
J
Joseph CantuAug 20, 2025
What to do if error code U400 is indicated on my Lamona Hob?
- J
  Jared BrewerAug 20, 2025
  If your Lamona hob displays an error code U400, it means the hob has been incorrectly connected. As a result, the controls will switch off after 1 second, and a continuous signal will sound. To resolve this, connect the appliance to the appropriate power supply.
S
Sally HatfieldAug 22, 2025
What to do if the symbol or Er03 blinks on my Lamona LAM9500 Hob?
- T
  Tara Gomez MDAug 23, 2025
  If the symbol or error code Er03 is blinking on your Lamona hob and a time-limited continuous signal is sounding, it indicates that food, cookware, or other items are causing the touch control sensor keys to be consistently operated. To fix this, clean the surface or remove the item. To delete the symbol, press the same key or switch the hob off and on.
J
Jeremy JonesAug 25, 2025
What does error code E2 mean on my Lamona LAM9500 Hob and how to fix it?
- J
  Jordan RobinsonAug 26, 2025
  If error code E2 is indicated on your Lamona hob, it means the electronic unit is too hot. To resolve this, check the installation of the hob and ensure that there is sufficient ventilation.
C
charlesmurrayAug 28, 2025
Why does my Lamona LAM9500 suddenly switch off?
- D
  Dr. Matthew MarshallAug 28, 2025
  If the hob or a cooking zone on your Lamona hob has suddenly switched off, consider these possibilities: * You may have accidentally pressed the ON/OFF key. * Sensor keys might be partly covered by a damp cloth, fluid, or a metallic object. Remove the item located in front of the sensor keys. * The safety cut-off device may have been activated because a power level was operated unchanged beyond a specific period. See the section on operation time limit.
B
Briana LivingstonAug 30, 2025
What does error code E8 on my Lamona Hob mean?
- A
  Aaron BuchananAug 30, 2025
  If error code E8 is indicated on your Lamona hob, it could be due to a fault on the left or right fan. The suction opening might be blocked or covered, or the fan itself may be defective. Check the hob installation to ensure sufficient ventilation. Refer to the sections on 'Protection against overheating' and 'Ventilation'.
S
sharpericSep 1, 2025
Why does the pot sign appear on my Lamona LAM9500 Hob?
- C
  Clifford CampbellSep 2, 2025
  If the pot sign appears on your Lamona hob, it means a cooking zone has been switched on, and the hob is waiting for a suitable pot or pan to be placed on it. Power will only be supplied once a pot is placed on the cooking zone.
D
Dennis AdamsSep 4, 2025
Why does the pot sign still appear on my Lamona LAM9500 with a pot on it?
- J
  Jason TaylorSep 4, 2025
  If the pot sign still appears on your Lamona hob even after placing a pot or pan on it, the cookware may be unsuitable for induction cooking, or the pot or pan might be too small.
S
Stephen BrownSep 6, 2025
Why does the cooling fan still operate after my Lamona hob has been switched off?
- A
  Austin FoxSep 6, 2025
  This is normal for Lamona hob. The cooling fan may continue to operate after the hob has been switched off because the electronic unit is being cooled down.
H
Holly PerezSep 9, 2025
Why does my Lamona hob make clicking or buzzing noises when switched on?
- J
  James WilliamsSep 9, 2025
  This is design-specific and has no influence on quality and operation of your Lamona hob.

Lamona LAM9500 Specifications

General

Number of Zones	4
Total Power	7.4 kW
Control Type	Touch Control
Material	Glass
Dimensions (WxD)	590 x 520 mm
Type	Electric
Safety Features	Child Lock, Residual Heat Indicator