EasyManua.ls Logo

Lamona LAM1110 - User Manual

Lamona LAM1110
24 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Gas Hob
LAM1110
User Guide
www.howdens.com/appliance-registration

Table of Contents

Questions and Answers

  • C
    carolynandersonAug 6, 2025
    Why is there no spark when lighting my Lamona LAM1110?
    • A
      Anthony WallsAug 6, 2025
      If there's no spark when you try to light the gas on your Lamona Hob, several things could be the cause: * **No electrical supply:** Ensure the hob is properly connected and the electrical supply is switched on. Check the fuse; if it blows repeatedly, consult a qualified electrician. * **Dirty spark electrode:** The electrode might be dirty. Clean it carefully using fine sandpaper or a file. * **Uneven burner cap and crown:** Check that the burner cap and crown are correctly positioned.
  • B
    Brett JohnsonAug 13, 2025
    What to do if the flame keeps blowing out on my Lamona LAM1110 after I light it?
    • J
      Jennifer DouglasAug 13, 2025
      If the flame on your Lamona Hob blows out immediately after ignition, it's likely that the thermocouple isn't getting heated sufficiently. After lighting the flame, keep the knob pushed in for about 5 seconds to allow the thermocouple to heat up properly.
  • B
    bosborneAug 21, 2025
    How to fix uneven gas ring flame on Lamona LAM1110 Hob?
    • J
      Jessica MillerAug 21, 2025
      An uneven gas ring flame on your Lamona Hob is often due to a blocked burner crown. Ensure the injector isn't blocked and that the burner crown is clear of any food particles.
  • P
    Paul MooreAug 28, 2025
    Why does my Lamona Hob make metal noises when heating and cooling?
    • R
      Robert MorrisAug 28, 2025
      The metal noises your Lamona Hob emits during heating and cooling are typically due to the expansion and contraction of metal parts as they change temperature. This is normal and not a fault.

Summary

Before Using the hob

Explanation of symbols

Explains symbols used for warnings and information throughout the manual.

Safety

General Safety

General safety advice and usage restrictions for the hob.

Fire Safety Advice

Advice on preventing and dealing with fires related to the hob.

Pan Fire Procedure

Steps to take if a pan on the hob catches fire.

Deep-Fat Frying Safety

Specific safety warnings related to deep-fat frying.

Gas Safety Working

Guidelines for safe operation and maintenance when using gas.

Gas Leak Procedure

Procedure to follow if a gas leak is detected.

Using the hob

Hob Layout Overview

Diagram and labels identifying the different parts of the hob.

Burner Controls Explained

Explanation of how to operate the hob's control knobs.

Lighting the Burners

Step-by-step guide on how to light the hob burners.

Cooking With Gas Best Practices

Advice on matching pans to burners and adjusting flames for efficient cooking.

Turning Off Burners

Instructions on how to safely turn off the hob burners.

Energy Saving & Tips

Suggestions for energy saving and proper cookware use.

Acrylamides Information

Information about acrylamides formed during browning food.

Flame Failure Device

Explanation of the safety feature that cuts off gas if flame is lost.

Burner Cap Maintenance

Instructions for cleaning and correctly replacing burner caps and heads.

Cleaning & Maintenance

How to Clean Your Hob

Detailed instructions for cleaning the hob surface.

Installation

General Installation Info

General guidance and safety recommendations for hob installation.

Room Ventilation Requirements

Requirements for adequate ventilation during hob operation.

Hob Positioning Guidelines

Recommended clearances and placement of the hob within kitchen units.

Protecting Hob Cut-out

Advice on sealing the worktop cut-out to prevent moisture damage.

Clearances and Dimensions

Diagrams showing required clearances around the hob installation.

Installation Above Oven

Specific ventilation requirements when installing above an oven.

Applying Sealant Putty

Instructions for applying sealant putty for a secure fit.

Installation Above Unit With Drawer

Guidelines for installing the hob above units with doors and drawers.

Elbow Gas Pipework Installation

Correct procedure for connecting the gas supply pipework.

Gas Connection Procedure

Instructions for qualified personnel on connecting the hob to the gas supply.

Adapting to Different Gas Types

Steps to convert the hob for use with different gas types (e.g., natural gas, LPG).

Regulating Minimum Flame

How to adjust the burner flame to the correct minimum setting.

Electrical Connections

Ensure Power is Off

Crucial safety instruction to disconnect power before electrical work.

Mains Lead Wiring Colours

Wiring colour code and terminal identification for mains connection.

Technical Specifications

General Specifications

Key technical data, dimensions, and power ratings of the hob.

Cooking Zone Ratings

Detailed table of burner power ratings and corresponding injector sizes.

Troubleshooting

Your Guarantee

Guarantee Details (UK)

Information regarding the manufacturer's guarantee terms and conditions.

Reporting a Problem

Steps to follow when reporting a fault or requesting service.

Lamona LAM1110 Specifications

General IconGeneral
BrandLamona
ModelLAM1110
CategoryHob
LanguageEnglish

Related product manuals