EasyManua.ls Logo

LaMotte ColorQ TesTabs Pro-9 User Manual

LaMotte ColorQ TesTabs Pro-9
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Color
Q
TesTabs
Pro-9
®
3.18 62069
TABLET VERSION
Order Code 2069
800-344-3100 410-778-3100 410-778-6394
www.lamotte.com
PO Box 329 Chestertown Maryland 21620 USA
english
!
Insert tubes into ColorQ with line and arrow facing forward.
!
= Shade meter from bright sunlight. Press/Hold button to turn off.Sun
!
= Tube is misaligned, scratched, stained, or light chamber is stained.
See User Guide for more instructions.
Er7
!
Brush and rinse all tubes promptly after use.
!
Replace reagent caps securely.
!
Allow tubes to dry before returning to case.
!
If unit should auto-off during testing rinse and fill one tube to Blank and return
to testing.
!
Use only LaMotte replacement reagents.
!
bAt = Battery is low.
s
!
Utilisez des réactifs LaMotte pour rechanger uniquement.
!
””=Er7 Le tube est mal placé ou rayé, ou la caméra est tachée. Voir le Guide
de l'utilisateur pour toute autre instruction.
!
Introduire le ColorQ droit.
!
Ferrer correctement les reactifs.
!
Permettre que les tubes se sechent bien avant de les réutiliser.
!
= Maintenir l’appareil à l’ombre. Appuyer le bouton off pour l’eteindre.
!
Essuyer et nettoyer tous les tubes correctement après l'usage.
!
Si l'appareil s'éteint automatiquement refaire un blanc et reprendre l'analyse.
!
bAt Batterie basse.=
français
s
!
Insertar el tubo en el ColorQ recto.
!
= apartar el aparato de los rayos
del sol. Presionar/mantener el botón para
apagar.
!
””=Er7 El tubo está mal colocado o
rayado, o la cámara de lectura está
manchada. Para más instrucciones, consulte
la Guía del usuario.
!
Enjuagar y limpiar todos los tubos
adecuadamente después del uso.
!
Si el aparato se auto-apaga durante el test,
llenar un tubo para el Blanco y volver al
análisis.
!
Permitir que los tubos se sequen antes de
volver a usarlos.
!
Cerrar correctamente los reactivos.
!
Utilice unicamente los reactivos LaMotte.
(tabletas grado instrumento).
!
bAt = Batería baja.
español
WARNING! This set contains chemicals
that may be harmful if misused. Read
cautions on individual containers carefully.
Not to be used by children except under
adult supervision.
Question and Answer IconNeed help?

Do you have a question about the LaMotte ColorQ TesTabs Pro-9 and is the answer not in the manual?

LaMotte ColorQ TesTabs Pro-9 Specifications

General IconGeneral
Test ParametersFree Chlorine, Total Chlorine, Bromine, pH, Alkalinity, Calcium Hardness, Cyanuric Acid, Iron, Copper
Test MethodColorimetric
Measurement RangeVaries by parameter
Included Componentscarrying case
DisplayDigital
Power SourceBatteries
Storage ConditionsCool, dry place
Color MatchingDigital Colorimeter

Summary

ColorQ Pro-9 General Information

General Operation and Warnings

Instructions for tube insertion, shading, cleaning, drying, and understanding error codes like 'Er7' and 'bAt'.

Blank (Calibration) Procedure

English Instructions for Blank Calibration

Steps to calibrate the ColorQ meter using a water sample as a blank.

Free Chlorine/Bromine Test

English Instructions for Free Chlorine/Bromine

Steps to test for Free Chlorine (FCL) and Bromine (br) using DPD1 tablets.

Total Chlorine Test

English Instructions for Total Chlorine

Steps to test for Total Chlorine (tCL) using DPD3 tablets after Free Chlorine test.

pH Test

English Instructions for pH Test

Steps to test water pH using a pH tablet and the ColorQ meter.

Alkalinity Test

English Instructions for Alkalinity Test

Steps to test Total Alkalinity (ALY) using an ALK tablet and the ColorQ meter.

Calcium Hardness Test

English Instructions for Calcium Hardness

Steps to test Calcium Hardness (CH) using a CaHard tablet and the ColorQ meter.

Cyanuric Acid Test

English Instructions for Cyanuric Acid

Steps to test Cyanuric Acid (CYA) using a CYA tablet and the ColorQ meter.

Copper Test

English Instructions for Copper Test

Steps to test Copper (COP) using a COP BCA tablet and the ColorQ meter.

Iron Test

English Instructions for Iron Test

Steps to test Iron (Ir) using an IRON tablet and the ColorQ meter.

Biguanide Test

English Instructions for Biguanide Test

Steps to test Biguanide (big) using BIGUANIDE TEST SOLUTION and the ColorQ meter.

Biguanide Shock Test

English Instructions for Biguanide Shock

Steps to test Biguanide Shock (b Sh) using a BIGUANIDE SHOCK tablet and the ColorQ meter.

Related product manuals