LaMotte 6 Series User Manual

CON 6/TDS 6
Meter Manual
The LaMotte 6 Series

LaMotte 6 Series Specifications

General

Brand	LaMotte
Model	6 Series
Category	Measuring Instruments
Language	English

Summary

Meter Display and Keypad Functions

Meter Preparation and Initial Setup

Battery Installation and Low Battery Indicator

Step-by-step guide for installing AAA batteries and recognizing low battery indications.

Conductivity Probe Features and Care

Connecting Conductivity and Temperature Probes

Powering On the Meter and Initial Displays

Switching Between Measurement Modes

Meter Calibration Procedures

Key Calibration Information and Concepts

Explains calibration ranges, solution requirements, and recalibration effects.

Steps for Meter Calibration Preparation

Guidelines on selecting standards, calibration frequency, and probe rinsing.

Choosing Automatic or Manual Calibration

Compares automatic calibration (CON 6 only) and manual calibration methods.

Guide to Automatic Conductivity Calibration

Guide to Manual Conductivity/TDS Calibration

Calibrating the Temperature Sensor

Taking Measurements with the Meter

Measurements with Automatic Temperature Compensation (ATC)

Measurements with Manual Temperature Compensation

Basic Measurement Taking Steps

Advanced Meter Setup and Customization

Overview of Advanced Setup Menu Options

Selecting the Conductivity Cell Constant

CON 6 Automatic Calibration Setup

Setting the TDS Conversion Factor for TDS 6

Adjusting the Temperature Coefficient

Setting the Normalization Temperature

Restoring Meter to Factory Default Settings

Conductivity Probe Care and Maintenance

Troubleshooting Meter Problems

Interpreting LCD Error Messages

CON 6 and TDS 6 Technical Specifications