LaMotte Tracer 1766 User Manual

pH/Conductivity/TDS/Salinity Meter!
Instrument de mesure du pH, de la conductivité, du TDS et de la salinité !
Tracer
TM
pH/TDS/Salt PockeTester
Instrument de mesure du pH,
de la conductivité,
du TDS et de la salinité
Code 1766
Do Not allow pH sensor to
dry out.
¬ Store Upright
¬ Before first use, tap meter
against palm to move
electrolyte to tip.
¬ See pages 9 and 17.
Ne laissez pas le capteur
sécher.
¬ Stockez l’instrument à la
verticale.
¬ Avant toute utilisation,
tapotez l’instrument contre
la paume de votre main
pour déplacer l’électrolyte
vers le bout du capteur.
¬ Reportez-vous aux pages
9 et 38.

LaMotte Tracer 1766 Specifications

General

Brand	LaMotte
Model	Tracer 1766
Category	Measuring Instruments
Language	English

Summary

Introduction

Specifications

Parts and Accessories

Meter Description

Front Panel Description

Overview of the meter's physical controls, buttons, and indicators.

Tracer Display Explained

Explanation of the meter's LCD screen elements, units, and indicators.

Basic Operation

Powering and TDS Ratio Settings

Instructions for turning the meter on/off and adjusting the TDS compensation ratio.

Operational Modes and Indicators

Details on changing units, data hold, auto power off, and battery status.

Measurement and Display Considerations

Technique and Handling Advice

Key techniques for accurate measurements and proper electrode handling.

Testing Procedures

Getting Started with Testing

Initial steps for preparing and starting meter testing.

Changing Measurement Function

How to switch between pH, Conductivity, TDS, and Salinity measurement modes.

Measurement Procedure

General Measurement Steps

Step-by-step guide for performing measurements with the PockeTester.

Storing and Recalling Readings

Storing and Exiting Readings

Instructions on how to store a reading and exit the hold mode.

Clearing Stored Memory

Procedure for clearing all stored measurement data from the meter.

Calibration

pH Buffer Preparation

Steps for preparing pH buffer solutions using tablets.

pH Calibration Procedure

Guide for performing 1, 2, or 3-point pH calibration.

Calibration Status and Conductivity

Information on calibration reminders, RENEW indicator, and conductivity calibration.

Resetting Calibration Data

Procedure to clear all saved calibration data from the meter.

Operational Matrix

Maintenance

Storage Procedures

Guidelines for proper storage of the meter and electrode.

Battery Replacement

Steps for replacing the meter's CR2032 lithium ion batteries.

Electrode Care and Replacement

Replacing the Electrode

Instructions for safely removing and attaching the electrode.

Electrode Cleaning Recommendations

Troubleshooting

Warranty Information