LaMotte Tracer 1741 User Manual

Water Testing Leader Since 1919!
Leader en analyse d’eau depuis 1919!
Tracer
TM
pH PockeTester
Code 1741
Do Not allow pH sensor to
dry out.
¬ Store Upright
¬ Before first use, tap meter
against palm to move
electrolyte to tip.
¬ See pages 7 and 10.
Ne laissez pas le capteur
sécher.
¬ Stockez l’instrument à la
verticale.
¬ Avant toute utilisation,
tapotez l’instrument contre
la paume de votre main
pour déplacer l’électrolyte
vers le bout du capteur.
¬ Reportez-vous aux pages
22 et 26.

LaMotte Tracer 1741 Specifications

General

Brand	LaMotte
Model	Tracer 1741
Category	Measuring Instruments
Language	English

Summary

BASIC OPERATION

Powering the TRACER

pH TESTING

Preparation of Buffers

pH Calibration

Meter Reset

pH Measurement

pH Measurement of Soil

MAINTENANCE

Care/Storage of Electrode

Battery Replacement

SAFETY

General Safety Precautions

Important safety guidelines regarding device handling, children, and batteries.

Replacing the Electrode

TROUBLESHOOTING

Power on but no display

Troubleshooting steps for when the meter does not power on or display any readings.

Unstable readings

Diagnosing and resolving issues causing inconsistent or fluctuating measurements.

Slow response time or reading drift

Addressing slow measurement stabilization or gradual changes in readings.

Dry bulb

Static charge

Same readings in different buffers and samples

Erratic LCD display

Resolving unpredictable or unstable readings on the LCD screen.

Unexpected readings

Investigating and correcting readings that are not within expected ranges.

Display frozen

Steady '-1' display