INTRODUCTION
Thank you for purchasing the CON 6 Conductivity Meter or TDS 6 Total
Dissolved Solids Meter. These economy microprocessor-based handheld meters
deliver up to ±0.5% full-scale accuracy. It has a large custom LCD (Liquid
Crystal Display) for clear and easy reading.
The CON 6 measures Conductivity (µS/mS) and Temperature (°C) while the
TDS 6 measures Total Dissolved Solids (TDS) and Temperature (°C). These
sturdy meters measure up to 5 different ranges with auto-ranging capabilities
that that will switch automatically to the appropriate measuring range.
The meters include a conductivity electrode (cell constant K = 1.0) with
built-in temperature sensor, a rubber boot, 4 alkaline “AAA” batteries, and an
instruction manual.
Read the manual thoroughly before operating the meter.
To order other accessories and buffer standard solutions, refer to the
Accessories Section for more information.
5
To Next Page
Loading...
Need help?
General
