Lampo IP65 - Spare Parts

16
Lamp Replacement
Unscrew the 6 screws and remove the plastic cover.
Unscrew the 3 screws and remove the aluminium cover.
Unscrew the 2 screws and remove the reflector.
Lift the reflector.
Wearing adequate protective gloves, remove the bulb.
Insert a new bulb in the socket
Re- insert the reflector and screw the 2 screws.
Re- insert the aluminium coverage and screw the 3 screws.
Re- insert the plastic cover and screw the 6 screws.