1
BEFORE CONNECTING AND USING THE PROJECTOR, IT IS IMPORTANT TO READ CAREFULLY ALL THE
INSTRUCTIONS IN THIS MANUAL.
QUALIFIED PERSONNEL ONLY, IN COMPLIANCE WITH ALL THE SECURITY LAWS, CAN DO THE
INSTALLATION, THE MAINTENANCE AND THE UTILISATION OF THIS PROJECTOR.
BEFORE CONNECTING THE PROJECTOR, MAKE SURE THAT THE FREQUENCY AND THE VOLTAGE
VALUES ARE SUITABLE AS SPECIFIED ON THE PROJECTOR.
FOR ANY DOUBT, CONTACT YOUR SUPPLIER OR SEND AN E-MAIL TO:
tech@lamposrl.it
SOLID: Dust-tight
WATER: Protected against water jets
Suitable for direct mounting on normally flammable surfaces
Rated maximum ambient temperature (indoor with ventilation)
Connection must be made to a power supply system fitted with efficient
earthing (EN60598-1 – Class I fixture)
Replace any cracked protective shield, dichroic filter or lens
Ignitor circuit lamp have very high voltage
Index
Dimensions and weight ---------------------------------------------------------------------------------- page 2
Technical data --------------------------------------------------------------------------------------------- page 2
Storage ------------------------------------------------------------------------------------------------------ page 3
Admissible environmental conditions ----------------------------------------------------------------- page 3
Power supply ---------------------------------------------------------------------------------------------- page 3
Remove the lid -------------------------------------------------------------------------------------------- page 4
Example of connection ---------------------------------------------------------------------------------- page 5
DMX signal cable ----------------------------------------------------------------------------------------- page 5
User’s interface ------------------------------------------------------------------------------------------- page 7
DMX specifications of projector ----------------------------------------------------------------------- page 8
DMX starting address ----------------------------------------------------------------------------------- page 8
Stand alone mode (colour sequence) ----------------------------------------------------------------- page 13
Stand alone mode (one fixed colour) ----------------------------------------------------------------- page 14
Lamp replacement --------------------------------------------------------------------------------------- page 16
Spare parts ------------------------------------------------------------------------------------------------ page 17
To Next Page
Loading...