Need help?Do you have a question about the Lamtec LT3 and is the answer not in the manual?
General| Type | Infrared Thermometer |
|---|---|
| Display | LCD with backlight |
| Power supply | 9V battery |
| Emissivity | 0.10 to 1.0 |
| Laser pointer | Single laser for targeting |
| Operating Temperature | 0°C to 50°C |
Details the scope and version applicability of the manual.
Provides guidance on how to effectively use the manual and observe safety notes.
Explains the meaning of danger, warning, caution, and notice symbols used in the document.
Defines intended use, prerequisites, and conditions for safe operation of the device.
Specifies qualified personnel and user groups with different access levels for operating the device.
Details hazards from electrical equipment and measures for safe operation, gas leakage, and decommissioning.
Describes the standard and HT designs of the LS2 Lambda Probe and its components.
Explains how to navigate menus and operate the device using the keys.
Outlines the hierarchical structure of the device's menus.
Explains the symbols and information displayed on the device's status line.
Describes the basic display and the main menu options and sub-menus.
Outlines procedures and recommended intervals for probe testing and calibration.
Covers air voltage calibration, O2 electrode checks, and reading measured values.
Explains how to enter passwords to access different operational levels.
Guides on enabling and disabling maintenance mode for specific operations.
Details the internal resistance regulation and factors affecting it.
Describes how to interrupt the cold start procedure prematurely.
Covers offset, O2, test gas, and reference measurement calibration methods.
Information on probe lifetime and configuration of device settings.
Explains how faults and warnings are indicated and managed.
Lists specific fault codes, their meanings, and troubleshooting steps.
Lists specific warning codes and their meanings.
Instructions on how to access and view the fault history.
Safety precautions for dismantling the probe from gas channels.
Functional description and addressing of analogue output modules.
Functional description, addressing, factory settings, and diagnosis of digital outputs.
Functional description, addressing, factory settings, and diagnosis of digital inputs.
Describes the module for calculating combustion efficiency, including formulas.
Provides guidelines and environmental conditions for storing the device.
Guidelines for environmentally sound disposal of the device.
Explains deviations between wet and dry O2 measurements with conversion data.
Official declaration of the product's conformity with EU directives.
To Next Page
