O P E R A T I O N PAGE 9
Last printed 1/31/2012 4:04:00 PM
Version Rev. 2003D-0
Unloading the Drum
Manual Unloading
1. Set the speed control to a slow speed.
2. Press the (RST/ENT) button on the timer.
3. Press the tumbler start button.
4. When the cover is facing you, at the 2 o’clock position, press the stop button.
5. Loosen the cover knobs.
6. Open the vacuum valve on the drum to release the vacuum. (Loosen cover knobs
first.)
7. Remove the cover.
8. Remove the gasket.
9. Unload the drum.
To Next Page
Loading...