M A I N T E N A N C E PAGE 18
Last printed 1/31/2012 4:04:00 PM
Version Rev. 2003D-0
Lubrication
The motor is equipped with pre-lubricated ball bearings and will not require re-
lubrication. Should the gears require lubrication, use type “L-Industrial 30” (American
Oil Co.) grease or its equivalent. The following is a list of lubricants which can be used:
Mobile UX-EP2, Philube =EP2, Gulf Crown =EP2, Alvania =EP2, or Mutifax =EP2
IMPORTANT: COMPLETELY CLEAN THE OLD LUBRICANT FROM THE GEAR BOX
BEFORE ADDING FRESH LUBRICANT. UNDER NO CIRCUMSTANCES SHOULD
DIFFERENT TYPES OF LUBRICANTS BE MIXED!
To Next Page
Loading...