S T A R T U P PAGE 6
Last printed 1/31/2012 4:04:00 PM
Version Rev. 2003D-0
Check Tumbler Motor Control
1. Set variable speed control to 20.
2. Set tumbler timer to 2 minutes. See "Setting the Control Timer" in the OPERATIONAL
section.
3. Press the tumbler start button—the drum will now turn.
4. Turn the variable speed control up and down. The drum will speed up and slow
down.
5. The drum will turn until the tumbler timer counts down to zero, at which time the
drum will stop.
6. Press the (RST/ENT) button on the tumbler timer.
7. The machine is now ready to use.
To Next Page
Loading...