O P E R A T I O N PAGE 12
Last printed 1/31/2012 4:04:00 PM
Version Rev. 2003D-0
23. The Interval timer is now ready to run.
24. Press the tumbler start button to begin the cycle.
During the continuous or intermittent timing cycle, the tumbler timer will only count
down when the ON cycle is timing on the intermittent timer.
Stopping the tumbler with tumbler STOP button or photo-eye switch will stop the
tumbler timer and maintain its time. The intermittent timer will reset to the preset times.
Pressing the tumbler START button will restart the intermittent timer. The total timer will
restart from where it left off. Pressing the reset button on either the tumbler timer or
interval timer in the middle of a tumbling cycle will reset that timer to the preset time
settings.
To Next Page
Loading...