To Next PageTo Next Page
Need help?Do you have a question about the Land Pride NTS2607 and is the answer not in the manual?
General| Weight | 1, 370 lbs |
|---|---|
| Number of Blades | 42 |
| Blade Type | Fluted |
| Working Width | 84" |
| Overall Width | 87" |
| Transport Width | 87" |
| Tractor Hitch | 3-Point Hitch |
| 3-Point Hitch | Category 1 |
General safety precautions for operating the implement safely.
Explains the meaning and importance of safety alert symbols and signal words.
Specific warnings and guidelines to prevent child injury related to the equipment.
Procedures for safely shutting down and storing the tractor and implement.
Defines hazard signal words (DANGER, WARNING, CAUTION) and their meanings.
Precautions and regulations for safely transporting the implement.
Essential PPE required for safe operation and maintenance of the equipment.
Warnings and safety measures when working with high-pressure hydraulic fluid systems.
Strict warnings against allowing riders on the tractor or implement.
Specifies the minimum tractor horsepower and hitch category requirements for safe operation.
Instructions for installing the tow hitch option, including important safety notes.
Detailed instructions for plumbing hydraulic hoses for the tow option, emphasizing re-phasing.
Step-by-step process for purging air from the hydraulic system to ensure proper operation.
A pre-operation checklist to ensure safe and proper setup and readiness.
General operating safety alerts and precautions to be followed before and during operation.
Essential steps for safely shutting down the tractor and implement after operation.
Detailed instructions for correctly attaching the seeder to a 3-point hitch tractor.
Detailed instructions for correctly attaching the seeder to a pull-type tractor drawbar.
Core instructions for operating the NTS Seeder in the field for seeding.
Procedures for testing and calibrating the grass seed dispersal rate for accuracy.
Procedures for testing and calibrating the small seed dispersal rate for accuracy.
Procedures for testing and calibrating the native seed dispersal rate for accuracy.
Detailed guide with diagrams showing all lubrication points, types, and intervals.
