Table of Contents
11/13/18
© Copyright 2018 All rights Reserved
Land Pride provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the
preparation of this manual, Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use
of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this
product at the time of its publication, and may not reflect the product in the future.
Land Pride is a registered trademark.
All other brands and product names are trademarks or registered trademarks of their respective holders.
Printed in the United States of America.
RCF3684 Rotary Cutters 326-412M
Table of Contents
Important Safety Information . . . . . . . . . . . . . 1
Safety at All Times . . . . . . . . . . . . . . . . . . . . . . . . . 1
Look for the Safety Alert Symbol . . . . . . . . . . . . . . . 1
Safety Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Using This Manual . . . . . . . . . . . . . . . . . . . . . . . . . 8
Owner Assistance . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Section 1: Assembly & Set-Up . . . . . . . . . . . . 9
Tractor Requirements . . . . . . . . . . . . . . . . . . . . . . . 9
Torque Requirements . . . . . . . . . . . . . . . . . . . . . . . 9
Uncrating Instructions . . . . . . . . . . . . . . . . . . . . . . . 9
Gearbox Vented Dipstick . . . . . . . . . . . . . . . . . . . . 9
3-Point Cutter Assembly & Set-up . . . . . . . . . . . . . 10
Spring Hose Loop . . . . . . . . . . . . . . . . . . . . . . . 10
Tailwheel Assembly (3-Point) . . . . . . . . . . . . . . . 10
Tailwheel Lift Options (3-Point) . . . . . . . . . . . . . 10
Hitch Assembly (3-Point) . . . . . . . . . . . . . . . . . . 10
Hitch Arrangements (3-Point) . . . . . . . . . . . . . . . 11
Category ll Hitch (3-Point) . . . . . . . . . . . . . . . . . 11
Category lll Hitch (3-Point) . . . . . . . . . . . . . . . . 11
Category ll Quick Hitch (3-Point) . . . . . . . . . . . . 11
Category lll Quick Hitch (3-Point) . . . . . . . . . . . 11
Driveline Installation (3-Point) . . . . . . . . . . . . . . 12
Hitch Hook-up (3-Point) . . . . . . . . . . . . . . . . . . . 12
Driveline Hook-up (3-Point) . . . . . . . . . . . . . . . . 13
Hydraulic Hook-up (3-Point) . . . . . . . . . . . . . . . . 14
Check Driveline Collapsible Length . . . . . . . . . . . . 14
Check Driveline Maximum Length . . . . . . . . . . . . . 15
Check Driveline Interference . . . . . . . . . . . . . . . . . 16
Pull-Type Cutter Assembly & Set-up . . . . . . . . . . . 17
Axle Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Tailwheel Lift Options (Pull-Type) . . . . . . . . . . . 17
Spring Hose Loop (Pull-Type) . . . . . . . . . . . . . . 17
Hitch Assembly (Pull-Type) . . . . . . . . . . . . . . . . 18
Jack-shaft Driveline Assembly (Pull-Type) . . . . . 19
Front Driveline Assembly (Pull-Type) . . . . . . . . . 19
Hitch Hook-up (Pull-Type) . . . . . . . . . . . . . . . . . 20
Hydraulic Hook-up (Pull-Type) . . . . . . . . . . . . . . 21
Purge Hydraulic System (Pull-Type) . . . . . . . . . 21
Section 2: Optional Equipment Set-Up . . . . . 22
Front and Rear Guard Installations . . . . . . . . . . . . 22
Front Rubber Guard . . . . . . . . . . . . . . . . . . . . . . 22
Front Chain Guard (Single & Double) . . . . . . . . . 22
Rear Chain Guard (Single & Double) . . . . . . . . . 23
Rear Metal Deflector . . . . . . . . . . . . . . . . . . . . . 23
Shredder/Fixed Blades & Baffle Kits . . . . . . . . . . . 24
Assembly Instructions . . . . . . . . . . . . . . . . . . . . 24
Removal of Existing Blade Carriers . . . . . . . . . . 24
Shredder Assembly . . . . . . . . . . . . . . . . . . . . . . 25
Check Free Vertical Movement of Blades . . . . . 25
Front Fixed Blade Assembly . . . . . . . . . . . . . . . . 26
Left Side Fixed Blade Assembly . . . . . . . . . . . . . 26
Section 3: Adjustments . . . . . . . . . . . . . . . . . 27
Level & Set Deck Height (3-point) . . . . . . . . . . . . . 27
Level Left to Right (3-Point) . . . . . . . . . . . . . . . . 27
Cutting Height (3-Point) . . . . . . . . . . . . . . . . . . . 27
Tailwheel Height (3-Point) . . . . . . . . . . . . . . . . . 28
Ratchet Jack . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Hydraulic Cylinder . . . . . . . . . . . . . . . . . . . . . . .28
Center 3-Point Link (3-Point) . . . . . . . . . . . . . . . 28
Level & Set Deck Height (Pull-Type) . . . . . . . . . . . 29
Level Front To Back (Pull-Type) . . . . . . . . . . . . . 29
Cutting Height (Pull-Type) . . . . . . . . . . . . . . . . . 29
Ratchet Jack . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Hydraulic Cylinder . . . . . . . . . . . . . . . . . . . . . . .30
Section 4: Operating Instructions . . . . . . . . . 31
Operating Checklist . . . . . . . . . . . . . . . . . . . . . . . . 31
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . 31
Inspect Tractor & Cutter . . . . . . . . . . . . . . . . . . . . 32
Tractor Shutdown Procedure . . . . . . . . . . . . . . . . . 33
Transporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Turning Angles for Pull-Type Cutters . . . . . . . . . . . 33
Crossing Steep Ditches & Banks . . . . . . . . . . . . . . 33
Blade Engagement & Disengagement . . . . . . . . . . 34
Blade Engagement . . . . . . . . . . . . . . . . . . . . . . . 34
Blade Disengagement . . . . . . . . . . . . . . . . . . . . 34
Field Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Unhook 3-Point Hitch . . . . . . . . . . . . . . . . . . . . . . . 35
Unhook Pull-Type Hitch . . . . . . . . . . . . . . . . . . . . . 36
General Operating Instructions . . . . . . . . . . . . . . . 37
Continue Table of Contents on next page
To Next Page
Loading...
