To Next PageTo Next PageWhy are the blades wearing excessively on my Land Pride Farm Equipment?
If the blades are wearing excessively on your Land Pride Farm Equipment, it could be due to cutting on sandy ground or contacting the ground frequently. In both cases, raise the cutting height.
General| Brand | Land Pride |
|---|---|
| Model | RCR2596 |
| Category | Cutter |
| Language | English |
General safety practices for operating machinery.
Explains the meaning of safety alert symbols and signal words.
Procedures for safely shutting down and storing equipment.
Importance and proper use of safety chains for towing.
Guidelines for safe transportation of equipment.
General advice for performing maintenance safely.
Recommended personal protective equipment for safe operation.
Hazards and precautions related to high-pressure hydraulic fluids.
Prohibits carrying riders on equipment.
Explains the importance and placement of safety labels.
Describes the intended uses and features of the rotary cutters.
Guidance on how to use the operator's manual effectively.
Information on dealer support and warranty registration.
Specifies the tractor horsepower and weight needed for operation.
A list of items to check before assembling the cutter.
Step-by-step procedure for safely shutting down the tractor.
Step-by-step guide to assembling the pull-type hitch.
Instructions for installing equal angle drivelines.
Instructions for installing constant velocity drivelines.
Steps for connecting a pull-type cutter to a tractor.
Step-by-step guide to assembling the 3-point hitch.
Steps for connecting a 3-point cutter to a tractor.
Steps for connecting the driveline to the tractor and implement.
Procedure to check driveline length to prevent damage.
Steps to verify no interference between components.
Installation and use of check chains for cutting height control.
Instructions for installing optional chain safety guards.
Instructions for installing optional rubber safety guards.
Adjustments for deck leveling and cutting height on pull-type units.
Adjusting the cutting height mechanism on pull-type units.
Adjustments for deck leveling and cutting height on 3-point units.
How to level the cutter deck side-to-side.
How to level the cutter deck front-to-back.
Adjusting the tailwheel for proper cutting height.
Pre-operation checks for safe and efficient use.
Pre-operation inspections before starting the cutter.
Guidelines for safe transport of the rotary cutter.
Procedures for engaging and disengaging cutter blades.
How to safely cross ditches and banks.
Recommended turning angles for pull-type cutters.
Steps for safely unhooking a 3-point cutter.
Steps for safely unhooking a pull-type cutter.
General guidelines for efficient and safe operation.
General maintenance advice for longevity.
Tips for maintaining hydraulic system health.
Procedures for inspecting, sharpening, and replacing blades.
Maintenance and replacement of skid shoes.
Explanation and run-in procedure for the slip-clutch.
Procedures for storing the implement for long periods.
Information on how to order replacement parts and colors.
Details on lubrication points and intervals for various components.
Lubrication and oil level checks for the gearbox.
Detailed specifications and capacities of the RCR25 Series cutters.
Features and benefits of the RCR25 Series rotary cutters.
A chart listing common problems, causes, and solutions.
Chart of torque values for various bolt sizes and grades.
Recommended tire inflation pressures.
Details of the Land Pride product warranty.
