Land UNO - Page 27

User Guide User Guide
Page 21 Page 21
Fibroptic Thermometer
Fibroptic Thermometer
3.7.2 Recommended wiring scheme
It is recommended that the UNO thermometer is used in conjunction with the
Land DIN Power supply Unit (DPU). In addition to providing the correct power
supply voltage for the thermometer, the DPU has simple connections for mains
supply, temperature output signal and Peak picker reset command signal.
To connect the thermometer to the DPU, connect the 6-way cable from the
thermometer across pins 1 to 7 of the DPU as shown in Fig. 16. A description
of each signal connection is given in the interconnection schedule, Fig. 17.
Fig. 16 DPU interconnections
UN970321
Yellow
Blue
White
Screen
Red
Black
Green
Reset control
12 34 56 78
L N 11 12 13 1 4 15 16
To t hermometer
Brown*
Blue*
White* Green*
Yellow*
Blue*
Screen
To i ndicator
AC main s
(
* Su
gg
ested colour
)
See Notes on Page 22
3.7.2 Recommended wiring scheme
It is recommended that the UNO thermometer is used in conjunction with the
Land DIN Power supply Unit (DPU). In addition to providing the correct power
supply voltage for the thermometer, the DPU has simple connections for mains
supply, temperature output signal and Peak picker reset command signal.
To connect the thermometer to the DPU, connect the 6-way cable from the
thermometer across pins 1 to 7 of the DPU as shown in Fig. 16. A description
of each signal connection is given in the interconnection schedule, Fig. 17.
Fig. 16 DPU interconnections
UN970321
Yellow
Blue
White
Screen
Red
Black
Green
Reset control
12 34 56 78
L N 11 12 13 1 4 15 16
To t hermometer
Brown*
Blue*
White* Green*
Yellow*
Blue*
Screen
To i ndicator
AC main s
(
* Su
gg
ested colour
)
See Notes on Page 22
StockCheck.com