Need help?Do you have a question about the Laney Prism P65 and is the answer not in the manual?
General| Power Output | 65 Watts |
|---|---|
| Equalisation | Bass, Middle, Treble |
| Reverb | Yes |
| FX Loop(s) | Yes |
| Cabinet Design | Closed Back |
| CD Input | Yes |
| Headphone Socket | Yes |
| Footswitch | FS2 (Not Included) |
| Type | Solid State |
| Speaker Size | 1x12" |
| Inputs | 2 x Jack |
| Effects | Reverb, Chorus |
| EQ | 3-Band EQ |
| Drivers | 1x12" Custom Driver |
Introduces the PRISM series DSP design and its versatility.
Guide to setting up and using the HERO mode of the amplifier.
Guide to setting up and using the LIVE mode of the amplifier.
Identifies and labels all controls on the front panel of the amplifier.
Details the various input and output jacks on the rear of the amplifier.
Identifies and labels the controls located on the rear panel of the amplifier.
Explains the operation of the power switch and input jacks.
Describes the function and use of the AUX IN input jack.
Details how to select between AMP models and HERO mode.
How to select and operate the HERO mode using the dedicated button.
How to select and operate the LIVE mode using the dedicated button.
Lists and describes the eleven factory preset studio quality effects combinations.
Explains the function of the Master and Gain controls for overall volume and drive.
Details the function of EQ and Volume controls for sound shaping.
How to select and store sounds using the channel buttons.
Instructions for activating and using the built-in tuner function.
How to adjust the speed of modulation/delay effects using the TAP button.
Explains the function of Edit, Bypass, and Boost buttons for sound manipulation.
Describes the function of the rotary control lights in different operating modes.
Guide on how to store custom sounds to channels for future recall.
Instructions for storing boost settings to AMP models.
How to adjust and overwrite factory effect settings.
Details the footswitch jacks and recommended footswitches for control.
Explains the use of the headphone and DI output for practice and recording.
Guide on using the AMP selector to tune individual guitar strings.
Details how to adjust parameters for the Chorus + Delay effect combination.
Explains how to turn off secondary effects or adjust mix levels in combinations.
Provides solutions for common problems like no sound output or tuner mode issues.
Instructions on how to restore the amplifier to its original factory settings.
To Next Page
