CONTROLS: IN THE ORDER OF USE
3
2
POWER
This is the main power on off switch.
After switch on the LED in the TAP Tempo button will flash to indicate power is on and the amplifier is in standby mode.
INPUT Jack
On plugging in the jack the amplifier will exit the standby condition and the
panel LEDs will indicate the last used positions.
Use only good quality cables to avoid poor sound quality.
AUX IN Jack
Use this input for CD/MP3 players to allow you to play along to the music or
use as backing. For use with standard stereo 3.5mm jack leads. Adjust the
output of your player to get the required mix level. The overall volume of both
your guitar and CD/MP3 is controlled by the fascia Master Volume control.
AMP Switch
Selects the AMP model or HERO model. See the following
table for AMP descriptions
(Also the string for tuning. See tuner operation. Page 22)
12
13
2
3
To Next Page
Loading...
