HERO Button
Press to select the HERO mode of operation. (The switch button will illuminate to confirm selection)
You will now have access via the AMP selector switch to the eleven factory pre-set sounds.
(See chart for details of the sounds)
You can make adjustments to these sounds using the other panel controls and if required store your new sound to one of the
Channels 1-4. (See channel storing. Page 20)
LIVE Button
Press to select the LIVE mode.
This makes the panel controls function in the conventional manner What You See Is What You Get: operation.
Here you can use the amplifier controls to obtain your desired sound, then if you wish, store it into one of the four channels
for future recall. (See channel storing. Page20)
14
15
#1 Acoustic 1 x 12 Acoustic combo - flat response
#2 Crystal Classic Solid state 2 x 12 Jazz Chorus combo
#3 VC 30 watt 2 x 12 single channel valve combo
#4 Snap Classic tweed 4 x 10 valve combo
#5 Lionheart 5 watt single ended Class A twin channel 1 x 12 combo
#6 Voltage Master Volume style head & 4 x 12 cabinet
#7 Hair Hot rodded master volume head & 4 x 12 cabinet
#8 TI Hi Gain signature head & 4 x 12 cabinet with mid range punch
#9 Leadout Classic Boutique Head with a few tweaks
#10 Octane Hi Gain modern all valve head & vintage 30 loaded 4 x 12 cabinet
#11 Wreck Ultra Hi Gain Metal head & 4 x 12 Cabinet
Tone Pallet Descriptions
Amp Amp Description
To Next Page
Loading...
