2
SAFETY PRECAUTIONS AND WARNINGS
DANGER
MAKE SURE THE MAIN POWER SUPPLY IS TURNED OFF AT THE SOURCE PRIOR TO
CONNECTING POWER TO THE APPLIANCE.
Disconnect the appliance from power before attempting any repair
The following clearances to combustible surfaces must be maintained.
4 inches to sides
3 inches to back
Make sure the wire leads that supply electricity to the cook top or upper oven decks are not
pinched between the oven and range top or between the decks.
Be sure the power supply voltage matches the voltage specified on the data plate.
This appliance must be phased per the wiring diagram.
Any cleaner used in the oven cavity must be labeled "Safe on Aluminum".
To Next Page
Loading...
