EasyManua.ls Logo

Lanner FW-7525 - User Manual

Default Icon
41 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Network
Application Platforms
Hardware platforms for next generation networking infrastructure
FW-7525
V1.1
User's Manual
Release Date: 2015/05/08
Question and Answer IconNeed help?

Do you have a question about the Lanner FW-7525 and is the answer not in the manual?

Summary

Chapter 1: Introduction

System Specifications

Details the hardware specifications of the FW-7525 system.

Connector Pinouts and Jumper Settings

Chapter 3: Hardware Setup

Installation Procedures

Steps for preparing installation, memory, and disk drive installation.

Installing Storage Devices

CompactFlash and Mini-PCIe Installation

Guides for installing CompactFlash and Mini-PCIe cards.

Installing FW-7525 on the Wall

Installing FW-7525 on a Rack

Chapter 4: BIOS Settings

BIOS Access and Navigation

Explains how to access, navigate, and use the BIOS setup utility.

Serial Port Console Redirection

Lanner Generation 2 LAN Bypass Configuration

Intel RCSetup and Processor Configuration

CPU Features and Power Management

Configures CPU features like EIST, C-States, and core activation for performance and power.

Security Settings

Password Management

How to set, change, or clear administrator and user passwords for BIOS access.

Boot Configuration

Boot Sequence and Options

Configures boot sequence, prompt timeout, NumLock state, and quiet boot.

Save & Exit Options

Appendix A: Programming Watchdog Timer

Appendix B: Setting up Console Redirections

Appendix C: Programming Generation 2 LAN Bypass

Lanner FW-7525 Specifications

General IconGeneral
Form Factor1U Rackmount
USB Ports2 x USB 3.0
MemoryDDR4
Storage2 x 2.5" HDD/SSD bays
Expansion Slots1 x PCIe x4
Serial Ports1
Video OutputVGA
Operating Temperature0°C to 40°C