Lantronix EDS1100 - Page 143

5: Commands and Levels
EDS1100/2100 Command Reference 143
<text> = name of the read-only community string to be set.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI
session.
show status
Displays the SNMP agent status.
state disable
Disables the SNMP server.
state enable
Enables the SNMP server.
system contact <text>
Sets the SNMP system contact information.
<text> = system contact information.
system description <text>
Sets the SNMP system description.
<text> = description of device.
system location <text>
Sets the SNMP system location.
<text> = location of device.
system name <text>
Sets the SNMP system name.
<text> = SNMP system name.
traps
Enters the next lower level.
write
Stores the current configuration in permanent memory.
write community <text>
Sets the SNMP read-write community string.
<text> = name of the read-write community string to be set.
ssh (ssh) level commands
client
Enters the SSH Client configuration level.
clrscrn
Clears the screen.
exit
Exits to the enable level.
server
Enters the SSH Server configuration level.
show history
Displays the last 20 commands entered during the current CLI
session.
write
Stores the current configuration in permanent memory.
ssh (config-cli-ssh) level commands
clear counters
Sets the SSH counters to zero.
clrscrn
Clears the screen.
default max sessions
Could not find VarID 316 in file http/config/varid_help.mtxt
default port
Restores the default local port to the SSH server.
exit
Exits to the CLI level.
max sessions <number>
Could not find VarID 316 in file http/config/varid_help.mtxt
no clear counters
Restores the SSH counters to the aggregate values.
port <number>
Sets the local port that the SSH server uses.
<number> = local port number.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI
session.
show statistics
Displays the SSH server statistics.
state disable
Disables the SSH Server.
state enable
Enables the SSH Server.
write
Stores the current configuration in permanent memory.
ssl (ssl) level commands