Lantronix EDS1100 - Page 142

5: Commands and Levels
EDS1100/2100 Command Reference 142
<password>
DSA public keys
clrscrn
Clears the screen.
delete all authorized users
Removes all authorized users
delete authorized user <username>
Remove an authorized user
exit
Exits to the ssh level.
host generate dsa 1024
Generate DSA public and private keys
host generate dsa 512
Generate DSA public and private keys
host generate dsa 768
Generate DSA public and private keys
host generate rsa 1024
Generate RSA public and private keys
host generate rsa 512
Generate RSA public and private keys
host generate rsa 768
Generate RSA public and private keys
host keys
Sets RSA or DSA public and/or private keys
no host dsa
Removes DSA public and private keys
no host rsa
Removes RSA public and private keys
show
Show SSH Server settings
show authorized user <username>
Show information for an authorized user
show history
Displays the last 20 commands entered during the current CLI
session.
show host dsa
Show full DSA public key
show host rsa
Show full RSA public key
write
Stores the current configuration in permanent memory.
smtp (config-smtp) level commands
clrscrn
Clears the screen.
default relay port
Restores the SMTP relay port to its default.
exit
Exits to the configuration level.
no relay address
Removes the SMTP relay address.
relay address <text>
Sets an SMTP relay address to direct all outbound email
messages through
a mail server.
relay port <number>
Sets the SMTP relay port.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI
session.
write
Stores the current configuration in permanent memory.
snmp (config-snmp) level commands
clrscrn
Clears the screen.
default read community
Clears the SNMP read-only community.
default system description
Restores the SNMP system description to its default.
default system name
Restores the SNMP system name to default: the product name.
default write community
Clears the SNMP read/write community.
exit
Returns to the config level.
no system contact
Clears the SNMP system contact.
no system location
Clears the SNMP system location.
read community <text>
Sets the SNMP read-only community string.