Lantronix EDS1100 - Page 141

5: Commands and Levels
EDS1100/2100 Command Reference 141
persist disable
Disables RSS feed data persistence.
persist enable
Enables RSS feed data persistence.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI
session.
show status
Display the RSS Feed status
write
Stores the current configuration in permanent memory.
rss (modbus-rss) level commands
clrscrn
Clears the screen.
exit
Exits to the next higher level.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current CLI
session.
trace input disable
Disables RSS trace of Modbus PDUs received on the serial line.
trace input enable
Enables RSS trace of Modbus PDUs received on the serial line.
write
Stores the current configuration in permanent memory.
serial (tunnel-serial:2) level commands
clrscrn
Clears the screen.
default dtr
Restores default DTR control, asserted while connected.
dtr asserted while connected
Asserts DTR whenever a connect or accept mode tunnel
connection is active.
dtr continuously asserted
Asserts DTR regardless of any connections.
dtr truport
Asserts DTR to match remote DSR when connected via Telnet.
dtr unasserted
Does not assert DTR.
exit
Returns to the tunnel level.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI
session.
write
Stores the current configuration in permanent memory.
serial (tunnel-serial:1) level commands
clrscrn
Clears the screen.
default dtr
Restores default DTR control, asserted while connected.
dtr asserted while connected
Asserts DTR whenever a connect or accept mode tunnel
connection is active.
dtr continuously asserted
Asserts DTR regardless of any connections.
dtr truport
Asserts DTR to match remote DSR when connected via Telnet.
dtr unasserted
Does not assert DTR.
exit
Returns to the tunnel level.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI
session.
write
Stores the current configuration in permanent memory.
server (ssh-server) level commands
authorized user <username>
Sets authorized username, password, and optionally RSA and/or