What to do if jobs are stuck in the host queue on Lantronix MPS100 Print Server?
To resolve jobs stuck in the host queue on your Lantronix Print Server, use the LPC administrative utility. Enter the following commands, in order: abort queue, clear queue, enable queue, and start queue. This will clear and reset the host queue.
General| Device Type | Print Server |
|---|---|
| Model | MPS100 |
| Manufacturer | Lantronix |
| Connectivity | Wired |
| Connectivity Technology | Wired |
| Network / Transport Protocol | TCP/IP |
| Remote Management Protocol | HTTP, SNMP |
| Compliant Standards | IEEE 802.3, IEEE 802.3u |
| Network Ports Qty | 1 |
| Humidity | 10% to 90% non-condensing |
| USB Ports | 1 x USB |
| Supported Protocols | IPP |
| Features | Auto-sensing |
| Interface | Ethernet 10/100Base-TX, USB 2.0 |
| Power Supply | 5V DC |
| Operating Temperature | 0 - 40 °C |
| Storage Temperature | -20 to 70 °C |
| Dimensions | 76.2 mm x 101.6 mm x 25.4 mm |
| Weight | 0.1 kg |
| Width | 101.6 mm |
| Depth | 76.2 mm |
| Height | 25.4 mm |
| Ports | 1 x USB, 1 x RJ-45 |
Provides step-by-step instructions for physically connecting and installing the MPS print server.
Details the necessity of setting an IP address for TCP/IP functionality and methods to achieve it.
Introduces LPR printing methods and essential parameters for configuration.
Provides troubleshooting steps for common issues with Unix hosts and LPR printing.
Explains how to create NDS print queues using NetWare Administrator.
Lists common issues and solutions for NetWare environments.
Describes the simplest method for LAT printing by printing directly to a port.
Offers solutions for common problems encountered with LAT host configurations.
Provides guidance for resolving issues with AppleTalk host printing.
To Next Page
