MPS/LPS User Guide 4: TCP/IP Configuration
4-4
the banner page at the beginning of the printout, install
and use the RTEL software. If banners are not needed,
they can be disabled.
The MPS cannot print multiple copies of the print job when
using the -#n lpr option.
If two print queues on the host refer to two services on the
same MPS, they must use separate spooling directories.
No special purpose input or output filters can be used
when printing via LPR. If this functionality is necessary,
use the named pipe interface program in the RTEL print
queue configuration software.
LPR on Windows NT/2000/XP (and later)
This section assumes that TCP/IP, Simple TCP/IP, and Microsoft
TCP/IP printing have been installed on the Windows host.
1. In the Control Panel, double-click the Printers icon.
2. Double-click the Add Printer icon.
3. In the window that appears, choose My Computer and click
Next.
4. Select the Add Port button and click Next.
To Next Page
Loading...
