Lantronix MPS100 User Manual

MPS/LPS User Guide 5: NetWare Configuration
5-6
Table 6: NDS Printing Errors
Bit Meaning Remedy
1 Server out of memory Turn the MPS off, wait a few
seconds, and turn it back on. Disable
unused protocols and/or remove
fileservers without print queues from
the NetWare access list.
2, 3 Unexpected response
from file server
Report the problem to Lantronix
Technical Support.
4 No printers found for
the MPS
Ensure that there are printers for the
MPS, and the printer names match
the service names on the MPS.
5 No printer queue
found
Ensure that the printers have
associated queues.
6 Login failed Ensure there is a print server object
configured with the same name as
the MPS.
7 Authentication failed Ensure the MPS login password is
the same as the print server object
password. If the MPS is using the
default password (access), there
should be no print server object
password.
8 Server cannot attach
to queue
Check the NDS partitions, replicas,
and volumes to ensure the file server
where the queue lives has the correct
information.

Lantronix MPS100 Specifications

General

Brand	Lantronix
Model	MPS100
Category	Print Server
Language	English