MPS/LPS User Guide 3: Getting Started
3-3
The default service names are based on the server name; therefore
the server name must be no more than 13 characters. If you
change the server name, the service names will change as well.
For example, changing the server name from MPS_xxxxxx to
BIOLAB will change the service names to BIOLAB_TEXT and so
on.
The default serial port services have the TCP/IP, NetWare, LAN
Manager, and AppleTalk protocols enabled. Parallel port services
have TCP/IP, NetWare, and LAN Manager enabled. LAT is
disabled by default on all services provided by the MPS because
many network managers object to the frequent LAT service
announcements. AppleTalk is disabled on parallel port services
because AppleTalk requires Bitronics mode, which is disabled by
default.
If you need to modify a default service, see the Server
Configuration chapter of the Print Server Reference Manual located
on the CD-ROM.
To Next Page
Loading...
