Lantronix SISPM1040-xxxx-L3 Install Guide
33855 Rev. A https://www.lantronix.com/ 31
LED Troubleshooting
RJ45 Ports
Left side
Green On
The port is enabled and established a link to connected device, and the
connection speed is 1000Mbps.
Green Blinking
The port is transmitting/receiving packets, and the connection speed is
Amber On
The port is enabled and established a link to connected device, and the
connection speed is 10/100Mbps.
Amber Blinking
The port is transmitting/receiving packets, and the connection speed is
-- Off
The port has no active network cable connected, or it is not established a
link to connected device. Otherwise, the port may have been disabled
through the switch user interface.
RJ45 Ports
Right Side
Green On The port is enabled and supplying power to connected device.
Amber On
An abnormal state, such as overload status, has been detected in the
switch.
-- Off
The port has no active network cable connected, or it is not connected a
PoE PD device. Otherwise, the port may have been disabled through the
switch user interface.
SFP Ports
Green On
The port is enabled and established a link to connected device, and the
connection speed is 1000Mbps.
Green Blinking
The port is transmitting/receiving packets, and the connection speed is
Amber On
The port is enabled and established a link to connected device, and the
connection speed is 100Mbps.
Amber Blinking
The port is transmitting/receiving packets, and the connection speed is
-- Off
The port has no active network cable connected, or it is not established a
link to connected device. Otherwise, the port may have been disabled
through the switch user interface.
Blue On
The port is enabled and established a link to connected device, and the
connection speed is 10Gbps.
Blue Blinking
The port is transmitting/receiving packets, and the connection speed is
10Gbps.
To Next Page
Loading...
Need help?
General
