Lantronix SISPM1040-xxxx-L3 Install Guide
33855 Rev. A https://www.lantronix.com/ 6
Related Manuals
A printed Quick Start Guide is shipped with each SISPM1040-xxxx-L3 switch. For the latest information, see the
online manual. Note that this manual provides links to third party web sites for which Lantronix is not responsible.
Related manuals include:
1. Product Support Postcard, 33504
2. SISPM1040-xxxx-L3 Quick Start Guide, 33584
3. SISPM1040-xxxx-L3 Install Guide, 33585 (this manual)
4. SISPM1040-xxxx-L3 Web User Guide, 33586
5. SISPM1040-xxxx-L3 CLI Reference, 33587
6. Release Notes (firmware version specific)
Note: Information in this document is subject to change without notice. All information was deemed accurate and
complete at the time of publication. This manual documents the latest software/firmware version. While all screen
examples may not display the latest version number, all the descriptions and procedures reflect the latest
software/firmware version, as noted in the Revision History on page 2.
Features
The SISPM1040-xxxx-L3 includes these features:
• L3+ features for better manageability, security, QoS, and performance (Router, OSPF, OSPFv3, RIP)
• Device Management System (DMS) built in
• PoE (IEE 802.3af/at/bt Power over Ethernet)
• PoE Power Delay, PoE Auto Checking, and PoE Scheduling
• IPv4/IPv6 dual stack management
• SSH/SSL secured management
• SNMP v1/v2c/v3
• RMON groups 1,2,3,9
• Diagnostics (Ping v4 and v6, Traceroute v4 and v6, Cable Diagnostics, Mirroring, sFlow)
• IGMP v1/v2/v3 Snooping and MLD v1/v2 Snooping
• RADIUS and TACACS+ authentication
• IP Source Guard
• DHCPv4 and v6 Snooping, DHCPv4 and v6 Relay (Option 82)
• ACL and QCL traffic filtering
• Spanning Tree - 802.1d (STP), 802.1w (RSTP) and 802.1s (MSTP)
• LACP and static link aggregation
• Q-in-Q double tag VLAN
• GVRP dynamic VLAN
• CFM (IEEE 802.1ag Connectivity Fault Management)
• APS (ITU-T G.8031 Automatic Protection Switching)
• ERPS (ITU-T G.8032 Ethernet Ring Protection Switching)
• Rapid Ring (3166-L3 and 3248-L3 only)
• MRP (Media Redundancy Protocol) (3166-L3 and 3248-L3 only)
• PTP (Precision Time Protocol) (IEEE 1528, ITU-T G.8265, G.8265.1, and IEEE 802.1AS)
• First Time Wizard requires default password change on initial startup
To Next Page
Loading...
Need help?
General
