Lantronix SISPM1040-xxxx-L3 Install Guide
33855 Rev. A https://www.lantronix.com/ 5
Product Description
The Lantronix SISPM1040-xxxx-L3 are next generation Industrial L3+ managed GbE switches. They are
affordable managed switches that provide a reliable infrastructure for your business network. These switches
deliver the intelligent features you need to improve the availability of your critical business applications, protect
your sensitive information, and optimize your network bandwidth to deliver information and applications more
effectively. They provide the ideal combination of affordability and capabilities for entry level networking including
small business or enterprise applications and help you create a more efficient, better-connected workforce.
Ordering Information
SISPM1040-2248-L3
Rack mountable hardened L3 switch with 136Gbps switching capacity,
twenty-two 10/100/1000 PoE+ ports, four 100/1000 dual speeds SFP ports,
and four 1G/10G SFP+ slots.
SISPM1040-3248-L3
Rack mountable hardened L3 switch with 136Gbps switching capacity,
twenty-four 10/100/1000 PoE+ ports, four 100/1000 dual speeds SFP ports,
and four 1G/10G SFP+ slots.
SISPM1040-3166-L3
Rack mountable hardened L3 switch with 80Gbps switching capacity,
sixteen 10/100/1000 PoE+ ports, four 100/1000 dual speed SFP ports
and two 1G/10G SFP+ slots.
Optional Accessories (order separately)
Direct Attached Copper Cable Assembly for 10G Networks
PS-DC-DUAL-5624T
Hardened 340 Watt Isolated Power Supply with 56VDC and 24VDC Dual
Output
Input: 90-264 VAC, 127-370 VDC; Output: 48 ~ 55 VDC, 10A, 340 Watts
Optional Power Cord; order separately where xx = NA, JP, etc.
About This Manual
This manual describes how to install, configure, and troubleshoot the SISPM1040-xxxx-L3, including how to:
• Install the switch
• Check switch status by reading the LED behavior
• Reset the switch or restore the switch to factory defaults
• Use a Web browser or the CLI to initially configure the switch
• Troubleshoot the switch
To Next Page
Loading...
Need help?
General
