Lantronix UDS 1100 - Page 21

4: Using DeviceInstaller
UDS1100 Device Server User Guide 20
DHCP Device Name
Non-configurable field. Displays the name associated with
UDS1100’s current IP address, if the IP address was obtained
dynamically.
To change the DHCP device name, see Configuration Using
Web-Manager or Configuration via Telnet or Serial Port
(Setup Mode).
Group
Configurable field. A group name to categorize the UDS1100.
Double-click the field, type in the value, and press Enter to
complete. This group name is not visible on other PCs or
laptops using DeviceInstaller.
Comments
Configurable field. Information about the UDS1100. Double-
click the field, type in the value, and press Enter to complete.
This description or comment is not visible on other PCs or
laptops using DeviceInstaller.
Device Family
Non-configurable field. Displays the UDS1100’s device family
as UDS.
Type
Non-configurable field. Displays the device type as UDS1100.
ID
Non-configurable field. Displays the UDS1100’s ID embedded
within the box.
Hardware Address
Non-configurable field. Displays the UDS1100’s hardware (or
MAC) address.
Firmware Version
Non-configurable field. Displays the firmware currently
installed on the UDS1100.
Extended Firmware
Version
Non-configurable field. Displays the full version nomenclature
of the firmware.
Online Status
Non-configurable field. Displays the UDS1100’s status as
online, offline, unreachable (the UDS1100 is on a different
subnet), or busy (the UDS1100 is currently performing a task).
IP Address
Non-configurable field. Displays the UDS1100’s current IP
address. To change the IP address, see Assigning an IP
Address
.
IP Address was
Obtained
Non-configurable field. Displays “Dynamically” if the UDS1100
module automatically received an IP address (e.g., from
DHCP). Displays
“Statically” if the IP address was configured manually. If the IP
address was assigned dynamically, the following fields
appear:
 Obtain via DHCP with value of True or False.
 Obtain via BOOTP with value of True or False.
 Obtain via RARP with value of True or False
 Obtain via Auto IP with value of True or False
Subnet Mask
Non-configurable field. Displays the UDS1100’s current
subnet mask. To change the subnet mask, see Assigning an
IP Address.
Gateway
Non-configurable field. Displays the UDS1100’s current
gateway. To change the gateway, see Assigning an IP
Address.