Lantronix UDS 1100 - Page 7

UDS1100 Device Server User Guide 6
Telnet Terminal Type _______________________________________ 57
Channel (Port) Password ____________________________________ 58
9: Setup Mode: Advanced Settings 59
Expert Settings (Option 5) ______________________________________ 59
TCP Keepalive Time In Seconds ______________________________ 59
ARP Cache Timeout In Seconds ______________________________ 59
Disable Monitor Mode at Bootup ______________________________ 59
HTTP Port Number _________________________________________ 60
MTU Size ________________________________________________ 60
TCP Re-Transmission Timeout _______________________________ 60
Enable alternate MAC ______________________________________ 60
Ethernet Connection Type ___________________________________ 60
Security Settings (Option 6) _____________________________________ 61
Disable SNMP ____________________________________________ 61
SNMP Community Name ____________________________________ 61
Disable Telnet Setup _______________________________________ 61
Disable TFTP Firmware Update _______________________________ 62
Disable Port 77FE (Hex) _____________________________________ 62
77FEh Access Mode _______________________________________ 62
Disable Web Server ________________________________________ 62
Disable Web Setup _________________________________________ 63
Disable ECHO Ports ________________________________________ 63
Enable Enhanced Password _________________________________ 63
Default Settings (Option 7) ______________________________________ 63
Channel 1 Configuration Defaults ______________________________ 63
Expert Settings Defaults _____________________________________ 64
Security Settings Defaults ___________________________________ 64
10: Firmware Upgrades 65
Obtaining Firmware ___________________________________________ 65
Reloading Firmware ___________________________________________ 65
Using TFTP: Graphical User Interface __________________________ 65
Using TFTP: Command Line Interface __________________________ 66
Recovering the Firmware Using the Serial Port and DeviceInstaller ___ 66
11: Monitor Mode 68
Entering Monitor Mode Using the Serial Port _____________________ 68
Entering Monitor Mode Using the Network Port ___________________ 68
Monitor Mode Commands ___________________________________ 68
A: Troubleshooting and Contact Information 71
LEDs _______________________________________________________ 71
Problems and Error Messages ___________________________________ 72
Lantronix Technical Support _____________________________________ 74