Lantronix xPico - Page 17

3: Using DeviceInstaller
Telnet Supported
Non-configurable field. Indicates if Telnet sessions are
permitted.
Telnet Port
Non-configurable field. Displays the xPico’s port for Telnet
sessions.
Web Port
Non-configurable field. Displays the xPico’s port for Web-
Manager configuration.
Maximum Baud Rate
Supported
Non-configurable field. Displays the xPico’s maximum baud
rate.
Note: the xPico may not currently be running at this rate.
Firmware Upgradeable
Non-configurable field. Displays True, indicating the xPico’s
firmware is upgradeable as newer version become available.
Supports Configurable
Pins
Non-configurable field. Displays True, indicating configurable
pins are available on the xPico.
Supports Email Triggers
Non-configurable field. Displays False, indicating email triggers
are not supported on xPico.
Supports AES Data
Stream
Non-configurable field. Displays True. xPico supports AES
encryption.
Supports 485
Non-configurable field. Displays True. xPico supports the RS-
485 protocol.
Supports 921K Baud Rate
Non-configurable field. Displays True. xPico supports baud
rates up to 921600 bits per second (bps).
Supports HTTP Server
Non-configurable field. Displays True.
Supports HTTP Setup
Non-configurable field. Displays True.
Supports 230K Baud Rate
Non-configurable field. Displays True.
Supports GPIO
Non-configurable field. Displays True, indicating the xPico
supports General Purpose Input Output (GPIO).
xPico User Guide 17