4: Configuration Using Web Manager
With this option, the Ethernet port auto-negotiates the speed
and duplex with the hardware endpoint to which it is
connected. This is the default.
If this option is not selected, the complete the fields that
become available:
Speed: The speed of data transmission. The default
is 100 Mbps.
Duplex: The direction of data transmission. The
3. When you are finished, click the OK button.
4. On the main menu, click Apply Settings.
Server Configuration
The unit’s server values display when you select Server from the main menu. The
following sections describe the configurable parameters on the Server Settings page.
Figure 4-4. Server Settings
To configure the xPico’s device server settings:
1. On the main menu, click Server.
2. Configure or modify the following fields:
xPico User Guide 22
To Next Page
Loading...
