Lanzar VIBE XE3 - Specification

SPECIFICATION
Pre-amp Input level 0.12V to 4V
Input impedance 10K
Frequency response 10Hz to 30KHz+1dB
T.H.D. 0.03%
Channal separation >82dB
Signal to noise ratio
>92dB
Maximum output
7.5V RMS
Equalizer frequencies
50Hz, 250Hz, 1000Hz, 2500Hz,6500Hz
Cut/Boost
+/-12dB
Sub-woofer ievel control
I -6dBto+10dB
Crossover
Sub-woofer output 50Hz, 80Hz, 100Hz, 120Hz
Slope 18dB/Octave
Rear output 80Hz, 100Hz, 150Hz, Full
Slope 12dB/Octave
Front output 100Hz, 150Hz. 200Hz, Full
Slope 12dB/Octave