Lanzar VIBE XE3 - Troubleshooting

TROUBLESHOOTING
Symptom Possible remedy:
Signal Processor Check:
does not turn on. 'Remote Turn-On wire has {+) 12V
•{+) 12V wire has (+}12V
'Ground wire is properly connected:
Level of sound is Check:
low. 'Wiring is not loose or cabies misconnected/disconnected
'RCA cables are not faulty
Background noise Check:
is too high. 'Wiring is not loose or cables misconnected/disconnected -
ground is important
*RCA cables are not faulty
PRECAUTIONS
Enjoy your system, but use it wisely and safely I
* Never drive with the volume raised so high you cannot hear what is occuring in
traffic around you.
* Be ware that repeated exposure to excessive volume levels can permanently
damage your hearing!
' Keep all electronics away from moisture, dust, extreme heat or extreme
vibrations.
- 9 -