Need help?Do you have a question about the LAPIS Semiconductor EASE1000 and is the answer not in the manual?
General| Brand | LAPIS Semiconductor |
|---|---|
| Model | EASE1000 |
| Category | Microcontrollers |
| Language | English |
Explains safe and correct usage procedures and pictorial indications.
Lists warnings and notes for safe operation to prevent damage or injury.
Defines technical terms used in the manual for clarity.
Provides an overview of EASE1000 as an on-chip emulator and flash writer.
Details the hardware, manuals, and accessories included with EASE1000.
Illustrates and describes the physical appearance and indicators of EASE1000.
Outlines the required environmental and operational conditions for EASE1000.
Specifies hardware requirements for the target system, including interface and power.
Details circuit configurations for connecting EASE1000 to various target LSIs and specific pins.
Explains EASE1000's 3.3VOUT supply and alternative target system power output.
Provides recommended board layout and pin assignments for the interface connector.
Details the procedure for connecting and powering on EASE1000 and the target system.
Outlines the correct procedure for disconnecting and shutting down EASE1000.
Explains the on-chip debug capabilities using DTU8 debugger.
Details the flash writing functionality with MWU16 host program.
Explains the EASE1000 status indicated by POWER and BUSY LEDs.
Provides critical notes and considerations for using the debug function.
Details the specifications and usage precautions for the 3.3VOUT pin.
Discusses the impact of the external environment on EASE1000 operation.
Provides confirmations needed before and after flash writing operations.
Emphasizes using supplied cables and warns against using alternatives.
Provides physical specifications for EASE1000 and its cables.
Illustrates the physical appearance of the EASE1000 interface cable.
Directs users to firmware update information in release notes.
To Next Page