LAPIS Semiconductor EASE1000 - Removal Procedure

EASE1000 User’s Manual
Chapter 3 START
3.1.2 Removal Procedure
(1) Close the software on the host PC.
(2) Turn off the target system.
(3) Disconnect the USB cable from EASE1000.
(4) Disconnect the EASE1000 interface cable between EASE1000 and the target system.
Note
Be sure to disconnect according to the disconnecting procedure.
Failing to obey the procedure may damage EASE 1000 or the target system, or cause an
electric shock or fire.
FEXTEASE1000-02 2