EASE1000 User’s Manual
Chapter 1 PREFACE
Description of Term
The following shows the terms used in this user's manual and their descriptions.
It is an on-chip emulator for microcontroller of Lapis
Semiconductor.
It has a function as a writer (hereinafter referred to as flash
writer) to a LSI with built-in flash memory, as well as the
on-chip emulator function.
It is software to control the on-chip emulator function of
EASE1000 and is a Windows application running on the PC.
MWU16 flash multi writer host program
It is software to control the flash multi writer function of
EASE1000 and is a Windows application running on the PC.
It is a board having a LSI to be debugged by EASE1000 or
whose flash memory to be written or erased.
It is a PC with the DTU8 debugger, MWU16 flash multi
writer host program, and USB driver installed.
It is a cable to connect EASE1000 with the host PC.
It is LSI debugged by EASE1000.
It is an interface cable to connect EASE1000 with the target
system.
FEXTEASE1000-02 4
To Next Page
Loading...