EASE1000 User’s Manual
Chapter 1 PREFACE
Be sure to read this page before using this product.
● Do not apply a voltage exceeding the 5.5V to the VTref pin of the EASE1000
Interface cable. It might cause fire or failure.
● The order of power ON and OFF needs extra attention. Incorrect order might cause
fire or failure.
● Be sure to turn off the EASE1000 before connecting or disconnecting it. Otherwise,
it might cause fire or failure.
● Be sure to turn off the EASE1000 and the user application system before connecting
or disconnecting them. Otherwise, it might cause fire or failure.
● The EASE1000 is an unfinished product and intended for research and development and for
expert use in the research and development facility only.
The EASE1000 is not intended for use for volume production or parts thereof.
● Do not use the EASE1000 for the final check of target LSI of operation.
● The guarantee period to the initial failure of EASE1000 is one year.
The obstacle by the wrong usage and reconstruction etc. cannot be guarantee.
● The content specified herein is subject to change for improvement without notice.
Therefore, when using the EASE1000, the contents of the manual should check in the newest.
FEXTEASE1000-02 3
To Next Page
Loading...