8
3000
English
H
WORKING
• Move the accelerator lever (H4) to midway between the min
and max position.
• Pull the start-up cord (H5) completely.
• After the engine starts, gradually turn the choke (H3) to
(open) position;
START OF THE PAINTING OPERATIONS
• Use the tooling after performing all the SETTING UP operations
above described.
• Dip the suction pipe into the product tank.
• Open the tap (H1) on the fuel line.
• Turn the starting knob (H2) to "ON" position.
•
Move the “START” lever
(
H
3)
to the CLOSED position.
H1
H2
H4
H5
H3
To Next Page
Loading...