Name: Larsen & Brusgaard ALTITRACK
Brand: Larsen & Brusgaard
Rating: 4 (1 reviews)

To Next Page

To Previous Page

13 - Replacing the Battery

Fig.28–BatterycoverwithscrewsFig.29-Battery

1. Unscrew and remove battery cover

2. Remove old battery

4.Installnewbatterynotingpolarity.UseSAFTLS14250(3.6V)orequivalent

5. Press a paperclip into the tiny (Reset) hole next to the battery and release

The unit restarts

6. Put battery cover back into place and fasten the 2 screws

After battery replacement, the battery system requires 2 minutes to calibrate itself

before showing the correct status. While calibrating, the battery icon toggles

between full and low.

Other manuals for Larsen & Brusgaard ALTITRACK

Questions and Answers:

Need help?

Do you have a question about the Larsen & Brusgaard ALTITRACK and is the answer not in the manual?

General