22
After 14 hours the ALTITRACK calibrates to the new elevation and displays “0”
The ALTITRACK switches OFF automatically 14 hours after the recalibration.
The altitude offset is not retained when the ALTITRACK is switched OFF.
7 - Backlight
Enable: Press and hold Right Front Button until “ACCESS” flashes two times.
Disable: Press and hold Right Front Button until “ACCESS” lights.
Note: The backlight is automatically disabled when manually switching OFF the
ALTITRACK.
Note: If the backlight is turned ON while the ALTITRACK is not in Jump Mode, the
backlight will automatically turn OFF after 2 hours.
If the backlight is turned ON while the ALTITRACK is in Jump Mode, the backlight will
remain ON until the unit exits Jump Mode.
To Next Page
Loading...
